b-science.net
FAQ ☰ Use Cases Blog About Us Register Log In


2026-11-17
Visual Summary Switch to Patent Update

Li-Ion Battery Technology
Patent Highlights – Free Version

Zinc–copper nanoparticle carbon coatings replacing silver/carbon interlayers at the negative electrode of lithium metal all-solid-state cells, supercritical CO2-channeled coal tar carbon scaffolds for CVD silicon-carbon anodes, and sub-stoichiometric lithium sintering of spray-pyrolyzed precursors with lithium added during cobalt coating for NMC positive electrodes

Prospective High Impact Advancements

⚡
Electrolytes
All-Solid & Solid-Liquid
Lithium-alloying zinc and non-alloying copper nanoparticles in a carbon black coating (Zn : Cu : carbon 3 : 7 : 90 by weight) replacing the silver/carbon interlayer on the negative electrode of lithium metal all-solid-state cells
Overpotential: 64 mV @1 C charge
Contemporary Amperex Technology (CATL)
Predominantly amorphous, viscoelastic oxygen-doped lithium aluminum chloride catholyte (best: Li8Al9Cl35O6), formed by a second heat treatment of a LiAlCl4 precursor with AlCl3·6H2O whose crystal water supplies the oxygen
σ: 1.3 × 10−3 S/cm @25°C
Zhejiang Fengli Technology
Coarse, pre-fired LLZO outer tapes laminated onto both faces of a fine Ta-doped LLZO (LLZTO) core tape with LiBO2 sintering aid, keeping the core off MgO setter plates during sintering at 1100°C
Structure: 40 μm outer tapes of 10 μm LLZO on a 700 nm LLZTO core
−
Anode
Negative Electrode
Untreated coal tar crosslinked with a LaF3/CeF3 catalyst and channeled by supercritical CO2 depressurization into an oriented porous carbon scaffold for CVD silicon, bonded through a hexamethyldisiloxane-derived Si-O-C transition layer
Retention: 93% @500 cycles
Umicore
Pitch powder selected by thermogravimetric pyrolysis behavior (maximum weight-loss rate at 470°C, toluene-insoluble fraction 41 mass%) as soft carbon precursor for wet-milled nano-silicon composites (≈47 mass% Si)
Average coulombic efficiency: 99.92%, cycles 5–50
BTR New Material Group
Zinc-doped, magnesium silicate-containing SiOx with a nitrogen-modified CVD carbon shell, flexibility index R = 0.22 (Raman D/G peak-area ratio divided by AFM surface modulus in GPa)
Retention: 97.90% @15 days, 60°C storage
+
Cathode
Positive Electrode
Spray-pyrolyzed Ni0.62Co0.07Mn0.31Ox precursor sintered at a sub-stoichiometric Li/metal ratio of 0.98, the remaining lithium added as Li2CO3 with Co(OH)2 in the coating step
DCIR: 22.0 Ω
Ronbay Technology
Two-step co-precipitation of prismatic Li3PO4, followed by Fe/Mn hydrogen phosphates (Mn : Fe = 6 : 4) grown on it as a template, yielding a composite lithium manganese iron phosphate (LMFP) precursor
Powder resistivity: 35 Ω·cm
Gotion High-Tech
Lithium-rich leachate from two-stage phosphoric acid leaching of clay lithium ore as partial Li and P source, combined with non-stoichiometric iron phosphate and nano Fe2O3 (Fe molar ratio 5 : 1) for carbon-coated LiFePO4
Compaction density: 2.72 g/cm3
Benchmarking Experiments in Patents ⓘ
These benchmarks are drawn directly from experiments reported in the patents, where an inventive example incorporating the claimed innovation is compared against a comparative example that omits it while keeping the cell configuration, chemistry, and test conditions otherwise equivalent.
Cycle Retention with Zinc–Copper Coating Instead of Silver/Carbon Interlayer (Factorial)
94%
74%
Zinc and copper nanoparticles in carbon black (Zn : Cu : carbon 3 : 7 : 90 by weight) vs. silver/carbon coating (Ag : C 25 : 75) • capacity retention after 20 cycles, 0.33 C cycling, 45°C, NCA / argyrodite all-solid-state cells with lithium metal deposited during first charge, 4 MPa stack pressure
Cycle Retention with Oxygen-Doped Lithium Aluminum Chloride Catholyte (CATL)
98%
60%
Li8Al9Cl35O6 oxyhalide catholyte vs. LiAlCl4 catholyte • capacity retention after 50 cycles, 0.1 C cycling, 2.6–4.3 V vs. Li, 25°C, LiNi0.8Co0.1Mn0.1O2 composite cathode with Li7PS5Cl separator and In–Li counter electrode
Lithiation Volume Expansion with Si-O-C Bonding Layer in Coal Tar Carbon Scaffold (Ningbo Shanshan Silicon Based Materials)
102%
125%
Hexamethyldisiloxane (HMDSO)-derived Si-O-C transition layer under the Si-C surface layer vs. the same route without HMDSO bonding • lithiation volume expansion after CVD silicon loading, CR2032 coin cells, 0.01–3.0 V, 0.5 A/g (lower is better)
Precursor Tap Density with Li3PO4-Templated Two-Step Co-Precipitation (Ronbay Technology)
1.65 g/cm3
0.57 g/cm3
Li3PO4 co-precipitated first, then Fe/Mn hydrogen phosphates grown on it (prismatic particles) vs. single-step co-precipitation with all reagents fed simultaneously (platelet particles) • tap density of the lithium manganese iron phosphate (LMFP) precursor, Mn : Fe = 6 : 4

Recently Published Company Chapters

New in the Solid-State / Solid-Liquid Electrolyte Li-ion Battery Innovation & Patent Review

🏢
China
Qingtao
Technology Assessment: Qingtao operates two tracks – solid-liquid hybrid cells shipping at gigawatt-hour scale into passenger cars and grid storage, and an all-solid-state cell at the pilot stage. The chapter examines how near-term hybrid commercialization complements longer-term all-solid-state development, why a low-cost halide architecture makes interface stability the central scale-up question, and how public statements align with what the patent portfolio reveals about development priorities.
Product Development Pathway
(5 R&D Concepts)
Anion co-doped low-cost halide electrolyte from calcination-free mechanochemical synthesis, addressing the limited room-temperature ionic conductivity of a cost-attractive halide while retaining its high-voltage cathode compatibility. Melt-infiltration densification of a rigid halide membrane, where a lower-melting second halide fills interparticle voids under hot pressing to suppress porosity and dendrite pathways while the rigid phase retains mechanical strength. Further concepts address chemical incompatibility between electrolyte classes sharing one separator stack, interfacial side reactions and particle contact in solvent-free cathodes, and thin-membrane manufacturing that reconciles short-circuit safety with energy density.
Potential Synergies to Deliver Well-Rounded Cells for Application
Electrolyte synthesis, membrane densification, and interface engineering converging on a single multilayer architecture – each concept feeding one layer of a shared cell stack, enabling parallel de-risking of ionic conductivity, cycle life, and safety for launch.
🏢
France
Saft
Technology Assessment: Saft carries a sulfide and a polymer electrolyte track to cells on one solvent-free forming process. The chapter examines how that shared dry route positions against the cost and solvent sensitivity of conventional slurry coating, how each track may map onto distinct duty profiles in its core markets, why film uniformity across both feedstocks remains the central scale-up question, and how public statements align with what the patent portfolio reveals about development priorities.
Product Development Pathway
(5 R&D Concepts)
Solvent-free film-forming platform that produces electrode and electrolyte layers without ink solvents or drying steps, positioned as the common process hub for both electrolyte tracks and potentially as the main lever on production cost and film quality. Particle-engineered sulfide separator layer in which layer architecture rather than electrolyte chemistry is the operative design parameter, aimed at more continuous ionic transport through the full cell stack. Further concepts address interface stability and safety at the electrode level across both tracks, extending the shared process toward complete cell designs that can be matched to different application requirements on the same equipment.
Potential Synergies to Deliver Well-Rounded Cells for Application
One dry forming process potentially carrying both electrolyte tracks, with electrode- and layer-level concepts building on the same film body – enabling parallel de-risking of power, energy density and safety across distinct applications on shared equipment.