| ALD |
Atomic Layer Deposition |
| BET |
Brunauer–Emmett–Teller |
| BMIM |
1-Butyl-3-methylimidazolium |
| CMC |
Carboxymethyl Cellulose |
| CNF |
Carbon Nanofibers |
| CNT |
Carbon Nanotubes
|
| CTAB |
Cetyltrimethylammonium Bromide |
| CVD |
Chemical Vapor Deposition |
| CVI |
Chemical Vapor Infiltration |
| DMF |
Dimethyl Formamide |
| EC |
Ethylene Carbonate |
| EDLC |
Electrical Double Layer Capacitor |
| EDS |
Energy-Dispersive X-ray Spectroscopy |
| FSI |
Bis(fluorosulfonyl)imide |
| GO |
Graphene Oxide |
| HDA |
Hexadecylamine |
| HF |
Hydrofluoric Acid |
| HMDS |
Hexamethyldisilazane |
| HOPG |
Highly Oriented Pyrolytic Graphite |
| IP |
Intellectual Property |
| ICP |
Inductively Coupled Plasma |
| IPO |
Initial Public Offering |
| LAGP |
e.g. Li1.5Al0.5Ge1.5(PO4)3 |
| LATP |
e.g. Li1.3Al0.3Ti1.7(PO4)3 |
| LCO |
Lithium Cobalt Oxide, LiCoO2 |
| LFP |
Lithium Iron Phosphate, LiFePO4 |
| LLZ or LLZO |
e.g. Li7La3Zr2O12 |
| LMFP |
Lithium Manganese Iron Phosphate, LiFeXMn1-XPO4 |
| LMO |
Lithium Manganese Oxide, LiMn2O4 |
| LNMO |
Lithium Nickel Manganese Spinel, LiNi0.5Mn1.5O4 |
| LTO |
Lithium Titanium Oxide, Li2TiO3 |
| MAS-NMR |
Magic Angle Spinning Nuclear Magnetic Resonance |
| MCF |
Mesophase Pitch Carbon Fibers |
| MCMB |
Mesocarbon Microbeads |
| MW |
Molecular Weight |
| MWCNT |
Multi-Walled Carbon Nanotubes |
| NCA |
Lithium Nickel Cobalt Aluminum Oxide, LiNiCoAlO2 |
| NMC |
Lithium Nickel Cobalt Manganese Oxide, LiNiCoMnO2,
NMC111 indicates a nickel/manganese/cobalt ratio of 1:1:1, NMC 811 indicates a nickel/manganese/cobalt ratio of 8:1:1, etc.
|
| NMP |
N-methylpyrrolidone |
| P3HT |
Poly-3-hexylthiophene |
| PAA |
Polyacrylic Acid |
| PAN |
Polyacrylonitrile |
| PANI |
Polyaniline |
| PC |
Propylene Carbonate |
| PCB |
Printed Circuit Board |
| PDMS |
Polydimethylsiloxane |
| PECVD |
Plasma Enhanced Chemical Vapor Deposition |
| PEDOT |
Poly(3,4-ethylenedioxythiophene) |
| PEGDMA |
Poly(ethylene glycol) dimethacrylate |
| PEI |
Polyethyleneimine |
| PET |
Polyethylene Terephthalate |
| PFAS |
Per- & Polyfluoroalkyl Substances |
| PMMA |
Poly(methylmethacrylate) |
| PMVMA |
Poly(methyl vinyl ether-alt-maleic anhydride) |
| ppm |
parts per million |
| PPY |
Polypyrrole |
| PSS |
Polystyrene sulfonate |
| PTFE |
Polytetrafluoroethylene |
| PVA |
Polyvinyl Alcohol |
| PVC |
Polyvinyl Chloride |
| PVP |
Polyvinylpyrrolidone |
| PVDF |
Polyvinylidene Difluoride |
| RF-ICP |
Radio Frequency Inductively Coupled Plasma |
| SBR |
Styrene-Butadiene Rubber |
| SEI |
Solid Electrolyte Interphase |
| SEM |
Scanning Electron Microscopy |
| SPAC |
Special Purpose Acquisition Company |
| SPS |
Sodium Polystyrene Sulfonate |
| SSA |
Specific Surface Area |
| SSB |
Solid-State Battery |
| SWCNT |
Single-Walled Carbon Nanotubes |
| TEM |
Transmission Electron Microscopy |
| TEM-EELS |
Transmission Electron Microscope / Electron Energy Loss Spectroscopy |
| TEOS |
Tetraethylorthosilicate |
| TFSI |
Bis(trifluoromethanesulfonyl)imide |
| TGA |
Thermogravimetric Analysis |
| THF |
Tetrahydrofuran |
| USPTO |
United States Patent and Trademark Office |
| VGCF |
Vapor Grown Carbon Fibers |
| XANES |
X-ray Absorption Near Edge Structure |
